Monitoring changes in soil organic carbon pools, nitrogen, phosphorus, and sulfur under different agricultural management practices in the tropics

Soil organic matter not only affects sustainability of agricultural ecosystems, but also extremely important in maintaining overall quality of environment as soil contains a significant part of global carbon stock. Hence, we attempted to assess the influence of different tillage and nutrient management practices on various stabilized and active soil organic carbon pools, and their contribution to the extractable nitrogen phosphorus and sulfur. Our study confined to the assessment of impact of agricultural management practices on the soil organic carbon pools and extractable nutrients under three important cropping systems, viz. soybean–wheat, maize–wheat, and rice–wheat. Results indicated that there was marginal improvement in Walkley and Black content in soil under integrated and organic nutrient management treatments in soybean–wheat, maize–wheat, and rice–wheat after completion of four cropping cycles. Improvement in stabilized pools of soil organic carbon (SOC) was not proportional to the applied amount of organic manures. While, labile pools of SOC were increased with the increase in amount of added manures. Apparently, green manure (Sesbania) was more effective in enhancing the lability of SOC as compared to farmyard manure and crop residues. The KMnO₄-oxidizable SOC proved to be more sensitive and consistent as an index of labile pool of SOC compared to microbial biomass carbon. Under different cropping sequences, labile fractions of soil organic carbon exerted consistent positive effect on the extractable nitrogen, phosphorus, and sulfur in soil.     

Influence of exogenous urea on photosynthetic pigments, 14CO2 uptake, and urease activity in Elodea densa—environmental implications

This paper analyzes the effect of exogenous urea in increased concentration gradient (0, 100, 500 and 1,000 mg L^?1) on photosynthetic pigments (measured spectrophotometrically), uptake of ¹⁴CO₂ (using radioisotope), and urease activity (by measuring ammonia with Nessler’s reagent) in leaves of Elodea densa Planch. We have observed that low concentration of urea (100 mg L^?1) stimulates the accumulation of photosynthetic pigments and intensifies photosynthesis in E. densa, whereas high concentration (1,000 mg L^?1) suppresses these processes. Urease activity increased by approximately 2.7 and 8 fold when exogenous urea concentrations were 100 and 500 mg L^?1, respectively. However, exogenous urea in high concentration (1,000 mg L^?1) decreased urease activity by 1.5 fold compared to the control. The necessity of mitigating urea and other nitrogen-containing compounds (NH₃ from urea) in water bodies has been discussed with emphasis on the potential for phytoremediation of urea using common water weed viz. E. densa.     

Evaluation of Wind Fields Used in Grand Canyon Visibility Transport Commission Analyses

ABSTRACT

The Grand Canyon Visibility Transport Commission (GCVTC) was established by the U.S. Congress to assess the potential impacts of projected growth on atmospheric visibility at Grand Canyon National Park and to make recommendations to the U.S. Environmental Protection Agency on what measures could be taken to avoid such adverse impacts. A critical input to the assessment tool used by the commission was three-dimensional model-derived wind fields used to transport the emissions. This paper describes the evaluation of the wind fields used at various stages in the assessment. Wind fields evaluated included those obtained from the Colorado State University Regional Atmospheric Modeling System (RAMS), the National Meteorological Center's Nested Grid Model (NGM), and the National Oceanic and Atmospheric Administration's Atmospheric Transport and Dispersion (ATAD) trajectory model. The model-derived wind fields were evaluated at multiple vertical levels at several locations in the southwestern United States by determining differences between model predicted winds and winds that were measured using radiosonde and radar wind profiler data. Model-derived winds were also evaluated by determining the percent of time that they were within acceptable differences from measured winds.

All models had difficulties, generally meeting the acceptable criteria for less than 50% of the predictions. The RAMS model had a persistent bias toward southwesterly winds at the expense of other directions, especially failing to represent channeling by north-south mountain ranges in the lower levels. The NGM model exhibited a substantial bias in the summer months by extending northwesterly winds in the eastern Pacific Ocean well inland, in contrast to the observed southwesterlies at inland locations. The simpler ATAD trajectory model performed somewhat better than the other models, probably because of its use of more upper air sites. The results of the evaluation indicated that these wind fields could not be used to reliably predict source-receptor impacts on a particular day; thus, seasonally averaged impacts were used in the GCVTC assessment.     

Microbial degradation of pyridine using Pseudomonas sp. and isolation of plasmid responsible for degradation

Pseudomonas (PI2) capable of degrading pyridine was isolated from the mixed population of the activated sludge unit which was being used for treating complex effluents, the strain was characterized. Aerobic degradation of pyridine was studied with the isolated strain and the growth parameters were evaluated. Pyridine degradation was further conformed by chromatography (HPLC) analysis. The process parameters like biomass growth and dissolved oxygen consumption were monitored during pyridine degradation. In order to conform with the plasmid capability to degrade pyridine, the requisite plasmid was isolated and transferred to DH 5alpha Escherichia coli. The subsequent biodegradation studies revealed the ability of the transformed plasmid capability to degrade the pyridine.     

Modified Fenton's processes for effective in‐situ chemical oxidation—Laboratory and field evaluation

Fenton's reagent in its conventional form, although effective for contaminant treatment, is impractical from an in‐situ field application perspective due to low pH requirements (i.e., pH 3‐4), and limited reagent mobility when introduced into the subsurface. Modified Fenton's processes that use chelated‐iron catalysts and stabilized hydrogen peroxide have been developed with the goal of promoting effective in‐situ field application under native pH conditions (i.e., pH 5‐7), while extending the longevity of hydrogen peroxide. Laboratory experiments conducted in soil columns packed with organic soil to compare modified Fenton's catalysts with conventional catalysts (acidified iron [II]) indicated superior mobility and sorption characteristics for modified Fenton's catalysts. Furthermore, the acidic pH of a conventional catalyst was buffered to the native soil range, leading to increased iron precipitation/adsorption following permeation through the soil column. The chelates present within the modified Fenton's catalyst showed greater affinity toward iron compared with the native soil and, hence, minimized iron loss through adsorption during the permeation process even at pH 5‐7. Field effectiveness of the modified Fenton's process was demonstrated at a former dry‐cleaning facility located in northeast Florida. Preliminary laboratory‐scale experiments were conducted on soil‐slurry and groundwater samples to test the process efficacy for remediation of chlorinated solvents. Based on successful experimental results that indicated a 94 percent (soil slurry) to 99 percent (groundwater) reduction of cis‐1,2‐DCE, PCE, and TCE, a field‐scale treatment program was initiated utilizing a plurality of dual‐zone direct push injection points installed in a grid fashion throughout the site. Results of treatment indicated a 72 percent reduction in total chlorinated contamination detected in the site groundwater following the first injection event; the reduction increased to 90 percent following the second injection event. © 2002 Wiley Periodicals Inc.     

Trace Gas Emissions from Biomass Burning from Northeast Region in India—Estimates from Satellite Remote Sensing Data and GIS

Biomass burning associated with shifting cultivation areas from the northeastern region of India is an important source of trace gas emissions in the Southeast Asian region. In the present study, satellite data pertaining to IRS-P4 OCM data and DMSP-OLS has been used to quantify the intensity, areal extent and amount of biomass burnt in the northeastern region states at district level. Trace gas emissions have been quantified both by using IPCC based emission ratios and ground based emission ratios obtained from field based studies. Areal estimates with respect to shifting cultivation areas from IRS-P4 OCM satellite data of 4th April 2000 suggested nearly 112.99 km² of the northeastern region of India affected due to shifting cultivation. In the study, DMSP OLS nighttime data has been used to capture the real time fires during the dry season. The results suggested high amount of fires during the March season when compared to April and May. Using the emission ratios obtained from the ground-based studies and IPCC emission ratios, the emissions for the individual non-CO₂ trace gases have been computed in a GIS framework using the biomass data, combustion factors and emission ratios. Results suggested emissions of 2.063 Mt CH₄, 17.94 Mt CO, 1.419 Mt N₂O, and 51.28 Mt NO _x and 2.643 Mt release of CH₄, 3.7204 Mt CO, 0.145 Mt N₂O, and 8.477 Mt NO _x , respectively, from biomass burning due to shifting cultivation for the year 2000, from the northeastern region in India. The study highlights the importance of Satellite Remote sensing data and GIS in quantifying the trace gas emissions from biomass burning.     

Spatio-temporal analysis of fire events in India: implications for environmental conservation

Information on fires in different geographic regions of India is relatively scarce. This study quantifies spatial and temporal patterns in fire occurrences covering different states and districts in India. Two important scientific questions are answered in this study: (1) how are the fire events distributed across different geographical regions? (2) are there any specific districts where fire events clustered across space and time? To address these questions, Along Track Scanning Radiometer (ATSR) derived satellite fire counts from 1997–2006 were used and the datasets were analysed using spatial scan statistic. Spatial scan statistic provides a test statistic for most likely ‘hotspot’ spatial clusters, based on the likelihood ratio test and Monte Carlo simulation. Results from geographical analysis based on state boundaries suggested Maharastra state had the highest number of fires followed by Madhya Pradesh, Chattisgarh, Orissa, etc., during the 10-year period. Among the several districts, the spatial scan statistic identified the most likely cluster of fire events in Dausa, Karauli, Sawai Madhopur, Bharatpur and Alwar in addition to several other secondary clusters, with high statistical significance. These results are based on a large sample of cases, and they provide convincing evidence of spatial clustering of fire events in the Indian region. Results relating to hotspot areas of fire risk can guide policy makers towards the best management strategies for avoiding damages to forests, human life and personal property in the ‘hotspot’ districts.     

Equity and productivity assessments in the Olifants River basin, South Africa

Emerging approaches to water resources development and management typically highlight equity and productivity as two main objectives. In the context of integrated water resources management within a river basin, managers and stakeholders often need a comparative assessment of different options for water augmentation and/or allocation. Pitting such options against predefined objectives, such as equity and productivity, requires an assessment of the effects that available options will have on these objectives. Available documentation indicates that not only does the interpretation of such objectives vary widely, but also the available methods for assessing equity and productivity run into significant limitations in the availability of adequate data. This limitation has largely kept decision makers from gaining a comprehensive overview of equity and productivity scenarios, whether within or across sectors, that could facilitate better‐informed decisions. To address this methodological gap, this article scrutinizes different notions associated with equity and water productivity, and limitations in prevalent assessment methods with the view to develop and demonstrate pragmatic methodologies for assessing equity and productivity in data‐scarce contexts. The discussion and findings are based on a review of relevant literature and empirical and consultative research work in the Olifants River basin in South Africa. The demonstrated methodologies for assessing equity and productivity, besides being useful in data‐scarce contexts, are insightful for initiating several policy measures and also for exploring the relationship between equity and water productivity.     

Health problems among workers of iron welding machines: an effect of electromagnetic fields

The possible effects of EMFs on 100 workers were studied by means of structured interview and rating of subjective symptoms. As control 41 sewing machine operators and assembly workers were chosen, interviewed and likewise tested. The present Indian ceiling value of 250 Tesla for the equivalent power density was exceeded in more than 50% of the machines. The highest leakage fields, for EMFs, were found near machines, which gave a high exposure to the hands. Eye irritation complaints were reported by 40% of the workers. The fertility outcome did not show any significant result.